4-in-1 Capacitor Insulator Kit

Insulator board and hardware for floating 4-in-1 capacitor boards

This kit can be used to isolate our 4-in-1 can capacitor replacement PCBs from chassis ground. This is useful in cases where the original installation used an insulated can floating from chassis.

Includes one insulator PCB for 1-3/8 inch diameter cans with 46 mm CTC mounting holes, two nylon #6-32 screws, and two nylon #6-32 hex nuts.

If you are interested, please contact us.

To re-enable comments on posts, remove the comment markings from the function to the left